Course Description: This course offers instructional practices for teaching an onsite safety course, reducing the number of workplace accidents. Make your factory floor or warehouse a safer place to work by leading in-house training sessions. The course comes with complete kit including VHS or DVD, Leader Guides and PowerPoint Presentations. Additional members from same company for $135.00 member or $150.00 non-member and will not include kit.
Dates:
Fee: $525.00 Members / $575.00 Non-Members
Course Description: This course discusses the requirements of OSHA’s permit required confined space standard, 29 CFR 1910.146. It is designed for small employers or site representatives (line supervisors and managers) with the responsibility to develop a permit confined space program. It does not include hands-on demonstrations.
Dates:
Fee: $99.00 Members / $149.00 Non-Members
Course Description: The keys to effective safety and health programs include an on-site safety committee and thorough job hazard analysis. This four hour course will develop a step-by-step procedure for forming and managing effective safety committees. This program is designed for Safety and Health professionals, managers, team leaders and others responsible for developing workplace safety programs.
Dates:
Fee: $99.00 Members / $149.00 Non-Members
Course Description: A course designed to help participants understand key elements of Subpart E (Exit Routes, Emergency Action Plans & Fire Prevention Plans) issued by OSHA. This seminar is intended for team leaders, middle managers, human resource personnel, safety and health committee members, and other employees who have recently been appointed to safety and health responsibilities. This course covers OSHA exit routes, emergency action plans, & fire prevention plan regulations (29 CFR 1910.33-39 E) - Revision of Subpart E.
Dates:
Fee: $99.00 Members / $149.00 Non-Member
Course Description: Workers who suffer repetitive motion injuries spend a median of 19 days off the job. If you are a business owner, manager, supervisor or HR professional, this course can help you understand the importance of keeping your employees free from ergonomics related injuries.
Dates:
Fee: $149.00 Members / $199.00 Non-Members
Course Description: Training session combining lecture, video, group discussion and hands on training. All the basics are covered, plus specialized techniques. The Standard First Aid/CPR/AED course meets all OSHA requirements. First Aid certification is valid for three years; CPR certification is valid for two years.
Dates:
Fee: $50.00
Course Description: Controlling traffic through work areas is one of the most important and dangerous operations in construction maintenance. NSC’s Flagger novice training course teaches safety procedures for road, bridge, tunnel, water/sewer construction, public works and how to protect from injury or death.
Dates:
Fee: $50.00
Course Description: Prevent injuries, property damage and financial loss by identifying incident root causes. Accident Investigations help you uncover the who, what, why, when and how of each accident. We will show you how to get the root cause, correct the problem and keep it from happening again.
Dates:
Fee: $149.00 Members / $199.00 Non-Members
Course Description: In the course – specifically for full-time safety practitioners, committee members, safety coordinators, specialists and managers – participants learn to use JSA process to effect continues improvement, identify safety and financial benefits, and determine hazards inherent in task performance and how to complete a JSA form.
Dates:
Fee: $149.00 Members / $199.00 Non-Members
Course Description: In this course, you will learn how you can protect your workers and company by being in compliance with this critical safety procedure. Safety experts will guide you through interactive discussions and group activities on OSHA lockout/Tagout requirements. The course covers OSHA Control of Hazardous Energy and Lockout/Tagout Standard 1910.147 Subpart J.
Dates:
Fee: $99.00 Members / $149.00 Non-Members
Course Description: Developed for the construction professional, this course provides the fundamentals needed for a safe work site. Topics include cause of injury and property damage, instructional approaches to safety, compliance communication and work-site tracking.
Dates:
Fee: $149.00 Members / $199.00 Non-Members
Course Description: A course designed for anyone who is responsible for safety in general industry. Topics include inspections, citations and general duty clause penalties; walking/working services; hazardous material handling; and electrical/welding standards. You will be able to more effectively implement safety procedures for each of these critical areas by taking this course.
Dates:
Fee: $149.00 Members / $199.00 Non-Members
Course Description: This four hour course is designed to assist employers in identifying and fulfilling their responsibilities for posting certain records, maintaining records including illnesses and injuries as well as reporting specific cases to OSHA. We will look at what makes incidents reportable as well as forms we need to be aware of. Recordkeeping isn’t just about paperwork; it provides access to long term data to help pinpoint where safety and health incidents occur in the workplace.
Dates:
Fee: $99.00 Members / $149.00 Non-Members
Course Description: Implement a comprehensive safety program with confidence and get positive, measurable results with POSH. Whether you’re new to safety, or you’ve been in the field for some time, you’ll gain real value for POSH. You’ll receive perspective on a full range of occupational safety and health issues and work toward a specific action plan for safety you can implement in your workplace. We don’t just present the principals – we show you how to put them into practice to prevent injuries and related costs! NSC Certificate in Principals of Safety Course 2.6 NSC CEUs / 2.6 COCs
Dates
Fee: $1500.00 Members / $1900.00 Non-Members
Course Descriptions: A four- hour course designed for those responsible for conducting or supervising safety inspections and those responsible for training industrial safety and/or health inspectors. Upon completion of the Safety Inspections course, you will be able to: plan and conduct a safety inspection, complete inspection reports and develop recommendations for follow-up.
Dates:
Fee: $149.00 Members / $199.00 Non-Members
Other Occupational Training Class Descriptions
Course Description: Accident Investigations help you uncover the who, what, why, when and how of each accident. We will show you how to get the root cause, correct the problem and keep it from happening again. 4HR Seminar
Dates: TBD
Fee: $75.00 Members / $199.00 Non-Members
Course Description: The purpose of this one-day course is to develop a blood borne pathogens exposure plan as well as understanding methods of control, vaccinations, evaluations, as well as training and recordkeeping approaches.
Dates: TBD – Call to Schedule
Fee: $99.00 Members / $149.00 Non-Members
Course Description: This course offers instructional practices for teaching an onsite safety course, reducing the number of workplace accidents. Make your factory floor or warehouse a safer place to work by leading in-house training sessions.
Dates: TBD
Fee: $99.00 Members / $149.00 Non-Members
Course Description: Put safety behind every decision, operation and action – and watch your business thrive. Developed especially for small business owners, this course covers the four requirements for creating a positive safety culture: leadership, employee involvement, measurement and continued improvement.
Dates: TBD – Call to schedule
Fee: $149.00 Members / $149.00 Non-Members
Course Description: DDC-PTD addresses all the contemporary issues important to professional truck drivers. It was developed using input from drivers, fleet safety managers, educators and insurance professionals nationwide. With insurance rates for the trucking industry skyrocketing, your organization can reduce costs and save lives by including DDC-PTD in your driver training program.
Dates:
Fee: $50.00 Members / $80.00 Non-Members
Course Description: Electrical Equipment can be dangerous and deadly in the workplace. Don’t let your workers get caught off guard by the hazards associated with power usage and power failures. In this course OSHA regulations on electrical safety are translated into terms you can use. Our trainers show you practices and procedures to keep you in compliance and protect your employees. OSHA regulation 1910.301-399 Subpart S
Dates:
Fee: $99.00 Members / $149.00 Non-Members
Course Description: This four hour course presents the importance of and the requirements involving excavation component persons. Topics will include discussion of OSHA’s evacuation standards, excavation hazards, soil analysis techniques, protective system requirements and emergency response.
Dates: TBD – Call to Schedule
Fee: $99.00 Members / $149.00 Non-Members
Course Description: This four hour course teaches basic precautions for preventing fires and protecting workers. Details of OSHA's 1910 Subpart L (1910.155 through 1910.165) and tips on how to comply with 11 important OSHA standards. You will learn the general requirements for automatic sprinkler systems and fixed fire extinguishing systems as well as gain an understanding of the different types of fire extinguishers and identify which type(s) you need in your workplace.
Dates: TBD – Call to Schedule
Fee: $99.00 Members / $149.00 Non-Members
Course Description: This course helps you reduce chemical-related illness and injury in your facility and comply with the OSHA Hazard Communication Standard. This course includes developing an understanding for the guidelines for labeling hazardous chemicals using Material Safety Data Sheets (MSDS) to evaluate hazardous chemical exposures
Dates: TBD – Call to Schedule
Fee: $99.00 Members / $149.00 Non-Members
Course Description: We will help you navigate OSHA policies and procedures with a simple-to-understand course. You will learn how the OSHA act applies to your business, how to prepare for an OSHA inspection, and how to use the OSHA website as a valuable reference tool.
Dates: TBD – Call to Schedule
Fee: $99.00 Members / $149.00 Non-Members
Course Description: Machine guarding mistakes are one of the top 10 causes of OSHA citations. This course teaches you practical, real world methods to guard machinery in compliance with OSHA regulations. You’ll learn how to avoid common machine incidents and prevent injuries as well as empower your employees to recognize and prevent potential problems.
Dates: TBD
Fee: $99.00 Members / $149.00 Non-Members
Course Description: Increase your safety programs ROI with cost-effective solutions that are simple to understand and easy to implement. This course was developed for HR managers to help them understand the impact of safety on workers’ compensation rates and health care costs. It also serves as an excellent source for any employee working in safety and health.
Dates: TBD – Call to Schedule
Fee: $149.00 Members / $199.00 Non-Members
Course Description: This training gives experienced miners the knowledge they need to face the safety and health hazards involved in underground mining. Participants will learn their rights and responsibilities, job related safety procedures and rescue and first aid techniques. Students will receive their MSHA 5000-23 form upon completion.
Dates: TBD – Call to Schedule
Fee: $99.00 Members / $149.00 Non-Members
Course Description: An important aspect of a healthy safety program is providing safety practices for employees not only on the job but at home and off the job. This four hour seminar is designed for Human Resource Directors, Safety Managers, Safety Staff and employers who wish to develop a better understanding of the range of services available for employees to promote safety off the job.
Dates: TBD
Fee: $99.00 Members / $149.00 Non-Members
Course Description: The National Safety Council and the American Road & Transportation Builders Association (ARTBA) have teamed up to develop and distribute a new program, OSHA 10-Hour Training exclusively for the Roadway Construction Industry (OSHA-Roadway). This first-of-its-kind program focuses directly on the day-to-day hazards faced by roadway construction workers. Get a practical approach to recognizing and controlling OSHA-identified roadway construction hazards. We can train and certify your crew at your location or at one of our nationwide training centers.
Dates: TBD – Call to Schedule
Fee: $149.00 Members / $199.00 Non-Members
Course Description: Most workers who suffer eye, head and foot injuries aren’t wearing the proper equipment. This four-hour course provides the necessary information needed to comply with OSHA standard 1910.132-140 Subpart I regulations.
Dates: TBD
Fee: $99.00 Members / $149.00 Non-Members
Course Description: You’ll learn to systematically evaluate a workplace for hazards that can cause falls, slips and trips. Learn to develop an action plan to avoid costly injuries.
Dates: TBD – Call to Schedule
Fee: $99.00 Members / $149.00 Non-Members
Course Description: Topics in this four-hour program include understanding terminology, OSHA standards, NIOSH certification, and medical evaluation recommendations. Understand the large array of respiratory support equipment for hands on training.
Dates: TBD – Call to Schedule
Fee: $99.00 Members / $149.00 Non-Members
Course Descriptions: This course empowers supervisors and team based leaders to facilitate the integration or maintenance of a safety, health or environmental safety program. It also develops 17 compliance issues which every safety supervisor should know.
Dates: TBD – Call to Schedule
Fee: TBD
Course Description: This team safety course shows you how to make group safety efforts work for your organization. You’ll learn how to build an effective safety team, or get the most from the team you’ve already got. The course includes a self-assessment of your level of understanding as well as interactive exercises as an opportunity to employ your newly learned concepts.
Dates:
Fee: $149.00 Members / $199.00 Non-Members
Course Descriptions: This four hour course teaches you how to look for hazards and identify them as well as how to reduce the risk of injuries from falls - and their related costs. The seminar covers OSHA Walking - Working Surfaces Regulation (29 CFR 1910.21-30, Subpart D).
Dates: TBD – Call to Schedule
Fee: $99.00 Members / $149.00 Non-Members
Course Description: This four hour course will help you understand the key elements of the regulations as well as how to identify the hazards associated with various types of hot work. Get an overview of common hazards associated with various types of hot work, develop comprehensive understanding of each section of OSHA 1910.252 – welding, cutting and brazing, as well as 1910.119 Process Safety Management. Assume -- and assign -- responsibilities related to hot work precautions.
Dates: TBD
Fee: $99.00 Members / $149.00 Non-Members